Aqua Master Tools categorieen Menu

Show list

E50 Pro EC electrode

Replaceable EC electrode for EC Temp meter E50 Pro
Article number AMT1006
Replacing the electrode

Suitable for the EC Temp meter E50 Pro. Please refer to the User Guide for instructions on how to replace the electrode. Waterproof IP67.

  1. Properly unscrew the sealing ring in the lower part of the meter.
  2. Remove the defected/old electrode by gently pulling it.
  3. Carefully place the new electrode with the recess in the correct position so that the connectors properly connect and do not damage the meter or electrode.
  4. Check that the rubber seal is properly placed.
  5. Tightly tighten the sealing ring.
  6. Calibrate the meter as described in this manual.
  7. The meter is now ready for use.
Sitemap | General Terms and Conditions | Website by CM SpecialistAqua Master Tools